BLUEROCK Tools Model 930 STRiPiNATOR ® Wire Stripping Machine Copper Recycling

Description

STRiPiNATOR ®
Scrap Wire Stripping Machine Model 930 by BLUEROCK Tools NEW
SPECIFICATIONS:
Power Supply: 110V 50-60Hz 1.5KW 2 HP Motor
Wire Range: .064" (14 AWG) - 1.18" (600MCM) or in metric (2mm-30mm)
11 Channels of Cutters- 15 Blades
Strips Certain ROMEX® Brand Cable or other NM Cables
Heavy Duty High Quality On/Off Switch with built in Overload Protection
Combines Gear and Belt Driven Function
Cutting Speed: Approximately 75' per minute! (pieces of wire should be cut in 4 foot lengths)
Basically there are 2 sets of cutter/rollers.  It's made to cut the tops and bottoms of larger wires and the bottoms only on smaller wire.  The spring loaded mechanism on the top allows you to adjust the tension of the cutters depending on what wire or jacket size you are cutting.  You can cut two wires at once if you want.  Also, .064" is approximately 14 AWG.  I've cut smaller wire (16 AWG) with one of these in the past.  It's rated to cut up to 30mm (1.18").  We carry all spare parts in stock for this machine, so if you need anything in the future, feel free to contact us.
Note to Customers:  We have been the exclusive vendor for this Wire Stripping Machine in North American since 2007.  We brought it here to offer our customers an inexpensive alternative to the typical 00 machine.  We've been so involved with the development of this wire stripper that we've personally flown half way around the world on many occasions to assist in the engineering.  We even wrote the manual for it years ago.  If you want a realistic look at the quality of our machine take a look at our ebay feedback:
http://feedback.ebay.com/ws/eBayISAPI.dll?ViewFeedback2&userid=newmantradingcompany&ftab=AllFeedback
.  There, you'll see lots of happy customers who bought there wire strippers from us.  Thanks for the interest and let us know if you have any questions.
PACKING DETAILS:
Shipping Weight: 250lb
CARTON SIZE: 36” x 28” x 26”
Note that occasionally these machines will have a rough freight trip getting to our customers.  This sometimes will cause some paint chips or maybe a small dent on the back or side paneling. These things are always cosmetic and won’t affect the machines operation.   We just like to fully disclose everything to our customers so there are no surprises.  We want you to get what you’re expecting and we’re sure you’ll like this machine.
This is a commercial freight item and will ship using FedEx Freight. Shipping fees are highlighted below:
Shipping to a Commercial Address with Forklift: Free
Shipping to Local FedEx Freight Hub: Free
Shipping to a Commercial Address without a Forklift:
Shipping to Residential Address with Forklift:
Shipping to a Residential Address without Forklift: 0
Shipping to Canada: Contact For Quote
Shipping to New York Metropolitan Area: Contact For Quote
PLEASE INCLUDE YOUR PHONE NUMBER, CONTACT NAME, BUSINESS NAME AND BUSINESS ADDRESS FOR FREIGHT NEEDS DURING CHECKOUT. OUR SHIPPING COMPANY NEEDS THIS INFORMATION AND WE CANNOT SHIP WITHOUT IT! THANKS.
There will also be additional charges to ship to the New York City metro area (local shipping companies charge additional fees), please contact us for a quote before purchasing.
FOR CANADIAN CUSTOMERS, PLEASE CONTACT FOR SHIPPING QUOTATION (INCLUDE YOUR SHIPPING DETAILS). Shipping cost to a commercial address with a forklift should be close to as stated in shipping detail, but contact us for a quote as more remote destinations will probably be higher. Shipments to Canada will need a customs broker. If you do not have a broker, we can handle the brokerage, duties and taxes for 5. Contact us for more details.
FOR SHIPPING OUTSIDE OF THE LOWER 48 UNITED STATES PLEASE CONTACT FOR A SHIPPING QUOTATION, IF NOT OTHERWISE SPECIFIED IN ITEM DESCRIPTION.
BEWARE OF COPY-CAT SELLERS WITH DANGEROUS MACHINES! ESPECIALLY THOSE DIRECT FROM CHINA!! WE ARE THE ORIGINAL SELLER OF THIS ITEM AND IT SHOWS IN OUR CONSTANTLY REDESIGNED MACHINE! THERE ARE OTHER SELLERS OUT THERE THAT HAVE JUST STARTED SELLING THIS MACHINE WHO ARE YEARS BEHIND OUR DESIGN. TAKE NOTE OF THE OTHER SELLERS DANGEROUS SIDE GUARDS THAT DO NOT FULLY COVER THE PULLEY AND BELT SYSTEM! TAKE NOTE OF THE OTHER SELLERS ON/OFF SWITCH THAT WE CHANGED 5 YEARS AGO FOR SAFETY REASONS. WE PUT IN MOTOR RATED SWITCHES WITH OVERLOAD PROTECTION. NOTE THE LACK OF FRONT GUARDS AND LIMITED SIDE GUARDS WHERE YOUR WORKERS COULD HURT THEMSELVES. WE TAKE A LOT OF PRIDE IN OUR MACHINES AND CARE ABOUT OUR CUSTOMERS WELL BEING. SELLERS BRINGING IN MACHINES THAT LOOK LIKE OURS BUT ARE DANGEROUSLY DESIGNED IS IRRESPONSIBLE. REST ASSURED THAT OUR MACHINE IS EXTREMELY DIFFERENT FROM OTHERS OUT THERE AS OUR ENGINEERS HAVE MADE ALMOST 50 SERIOUS CHANGES OVER THE YEARS. LET US KNOW IF YOU HAVE ANY QUESTIONS ABOUT THIS MACHINE AS WE KNOW EVERYTHING ABOUT IT.
ALL PURCHASES MADE WITHIN THE STATE OF WASHINGTON WILL BE CHARGED 10% SALES TAX.
If you have any questions or need any advice let us know.
ROMEX® is a registered trademark of Southwire Company.
ATTENTION CUSTOMERS:
eBay has implemented a new “Star Rating System” that is very important to our business!
We must receive 5's to keep in a good standing with eBay
and want to make sure you will receive a 5 star service from us at all times!
Please understand that we here at BLUEROCK Tools® try our utmost to keep shipping time and shipping costs as low as possible. Ultimately the
shipping carrier chosen is responsible for this and we have little or no control over their costs.  We try our utmost to keep the shipping costs down to actual cost and a minimal handling fee to cover shipping expenses such as delivery confirmation, labels, packaging material, etc.  We try and ship within 24 business hours of your cleared payment.
Keep this in mind if you have a problem with any of the 4 ratings (communication, description, shipping time, shipping cost).  If you feel we don't deserve 5 stars in ANY of these areas
please contact us first before leaving a rating below a 5.
We at BLUEROCK Tools® pride ourselves on our customer satisfaction.  We hope you have a satisfactory experience and would like to take this time in
asking that you rate us 5 stars across the board
.  If there is anything that is keeping you from doing so please contact us so we can address the situation.  Thank you!
-BLUEROCK Tools®
IMPORTANT:
Please read the contract information below as you are agreeing to the terms and conditions of our business policy, return policy and warranty by purchasing this item.
BUSINESS POLICY, RETURN POLICY AND WARRANTY INFORMATION
The Newman Trading Company LLC (TNTC) DBA BLUEROCK Tools® makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 30 days from the date the customer purchases the item. ---This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidental, repairs or alterations outside our facilities, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product.  The purchaser of this item acknowledges that TNTC shall in no way be responsible or liable to purchaser or any other party for any use or misuse of this item.  The purchaser acknowledges that the purchaser has not and does not rely on TNTC’s skill or judgment with regard to the selection of the goods as fit or suitable for any particular purpose.  --- To take advantage of this warranty the purchaser must notify TNTC of intent to return and the product or part must be returned to TNTC with transportation charges prepaid.  Proof of purchase date and an explanation of the complaint must accompany the merchandise.  If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement.  Within this 30 day period the purchaser may also elect for a refund, not including shipping costs. We will return repaired products at our expense, but if we determine there is no defect, or the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product.  If the item is not returned in “new” condition with all packaging and accessories, it will have a minimum 15% refurbishing fee- maximum refurbishing fee will be accessed upon inspection of the item.  --- This warranty gives the purchaser specific legal rights and you may also have other rights which vary from state to state.  TNTC reserves the right to forum any legal disputes in courts residing in the State of Washington. ---
The foregoing warranty is expressly made in lieu and in place and stead of all other warranties express or implied including any warranty of merchantability or fitness for any purpose and of any other liability or obligation.  The foregoing warranty shall not apply to any goods or parts, which have been subject to improper installation, accident, negligence, alteration, abuse or misuse.
PAYMENT POLICIES
PayPal
PayPal is our preferred form of payment for eBay transactions.
Visa, Mastercard, Discover, American Express
You can also check out through eBay using your credit/debit card.  If you would like to process a credit card over the phone, please contact us after eBay purchase.
Personal Checks, Business Checks, Money Order/Cashiers Checks
Please expect 7-10 business days for you check, money order or cashiers check to clear once we receive it.  Once the check clears, we will ship your item.